Are you getting tired of looking at the old dirty driveway at your place every time you pass by it? Having an unsightly and stain-ridden driveway is really frustrating to the eyes.
However, your driveways and patios can come back to their pristine condition if you pressure or power wash them. After all, you have spent a lot of money installing driveways and patios.
Also, getting the best results through power washing is of utmost vital. There are some major tips that you can follow if you want to powerwash your concrete aspects. This will eliminate your worries about your concrete patios and driveways.
Here are some vital steps stated below:
1. You have to brush down your driveways and patios
The enticement of being able to utilize a power washer on your driveway will always be difficult to resist.
Before proceeding with the power tools and equipment, you must brush down your driveway first. Through this, you will get the best outcomes for sure. Even professionals always advise getting this step before carrying out the washing.
Here, using simple methods can be effective in getting the best results. You can use a stiff-bristled brush to make loose dust out of joints or settle in your driveway.
Also, when cleaning the driveway, you must remove all your vehicles. However, several people do not think of where the debris they are cleaning is going.
Moreover, you must confirm that you cover nearby doors using plastic coverings and close windows. This will prevent you from concluding house cleaning after finishing your driveways or patios.
2. You must de-grease the surface
Applying a de-greaser to your driveway is vital while pressure washing your driveways. It will help lose any accumulated stains and wash them away from the surface.
You will find pressure washers that have an attachment tool. This wool assists in the application of a de-greaser. However, if your pressure washer does not have that tool, you can spray over the surface. Once done, make sure you rub down using a stiff-bristled brush before beginning.
3. You can make your driveway look new and good
De-weeding your driveways and patios is a good idea to offer them a new look. Also, you have to prevent weeds from coming back to the surfaces. The best way to do so is by using a powerful weed killer. Moreover, you may begin grouting the weeds out using a hand fork.
After doing this, you have to cover the cracks completely. This will help in stopping weeds from coming back to the surface. You can use kiln-dried sand and a brush to prevent those pesky weeds.
4. You have to get your power washer prepared
Here the time comes to use the power washer. First, the application of detergent should be done to your driveway. While doing this, make sure that you wear old clothing and safety gloves if any splashes come onto you.
Also, you should hold the washer between 10 to 15 inches off the concrete. Moreover, you must try to maintain a consistent distance. You should execute in a symmetrical pattern. Besides, you have to overlap every stroke by some inches.
You need to leave the detergent for approximately 5 minutes. After that, go for the pressure wash. Make sure you work in the same pattern previously mentioned. Also, you have to utilise the high-pressure nozzle for washing your driveways.
Coming across a tough stain, you should move the power washer closer. Through this, you will be able to clean it more intensely. Also, you must confirm that you are thoroughly rinsing all of the detergents.
5. You have to allow your driveway to get dry
Make sure you let your concrete surface fully dry before allowing any vehicles to come onto this. Here, you have to keep in mind that this may take a full day. In warmer weather, it will get dry faster.
Applying a sealant can be helpful if you want the effects of pressure washing to stay longer. Remember that you can apply the sealant when the driveway is dry completely. Also, you have to use a long-handled roller when it comes to applying the sealant.
6. You must top up the joints with filler
Is your driveway built with the use of paving? If so, you must look at the joints where your paving slabs meet. You have to focus on identifying the need for topping.
Also, pour in some kiln-dried sand if you see multiple weeds going through the cracks or missing sand. It will significantly assist in sealing any empty areas that keep on causing problems for you.
Pouring over the sand onto the areas is all you need to do to top up the joints. Using a stiff-bristled brush to get into the cracks will be great here.
The process of pressure wash may look easy to you. However, it needs adequate knowledge and skills to get an effective power washing in Winslow. Thus, getting assistance from a professional can be a plus. With considerable experience and expertise, they can get the job done without much of s stretch.
Comments