An uninterrupted power supply is vital to ensure the timely completion of construction projects. No matter if you are planning to construct a new building from scratch or planning a makeover.
You need a power supply to run the small builder's tools. Additionally, while running heavy machinery you have to depend on not only a constant electric supply. To be precise, on higher voltages of electricity. However, if you have started constructing a new building, there are fewer ways to manage a persistent supply.
You may face sudden power cuts that cause unnecessary delays in the completion timing. The project costs and labour charges keep getting higher, without having the actual work done in time.
Determining the process to get temporary power in Edinburgh can be confusing. The electrical standards and requirements can be difficult to apprehend.
Whether you have experience getting temporary power solutions on-site multiple times or are a beginner, extra help is never bad.
This piece of writing will help you cover all the important parts regarding temporary power supply.
However, before you dig deeper, know about the concept first:
What Is Temporary Power?
Temporary power often becomes the last resort of the builders. A temporary power connection is timed and can be used for one year or lesser than that. Though sometimes it might take longer to complete the construction or the renovation.
In such cases, you would have to apply for a permanent power supply. However, if the project is about to be complete and the one-year deadline is also nearing, there is an alternative way. You can use a short extension cable to bridge the gap.
You must note that the temporary power supply is metered. It can be 30/32 A for small construction sites and 60/63 A for big commercial projects.
These are some of the keywords explained more thoroughly:
DNO: The DNO stands for Distribution Network Officer. The DNO is the power company that owns and runs the power supply infrastructure. Your property will be connected to the approved DNO groups of your locale. To know about your DNO, you need to go to the Energy Networks Association's postcode search tool and enter your postcode there.
MPAN: The MPAN stands for Meter Point Administration Number. You need to submit this 13-digit unique reference code to the DNO.
MOP: The MOP stands for Meter Operator Provider. This company will visit your construction site to install a new meter there. Nonetheless, your MOP will be responsible for the maintenance and time-to-time inspection of the meter, along with bill generation.
Here is the step-by-step guide to follow when applying for a builder’s temporary power solutions.
How To Get Temporary Power For Your Building Site?
Step One:
First things first. The first thing you should do is figure out the approximate amount of power the project would need. You will need the site layout plan, location map and the manufacturer’s specification sheet.
Step Two:
You have to figure out the registered DNO in your locality. Once you decide which DNO to choose, you must discuss your requirements in detail with the company. In the discussion, the DNO will calculate the approximate cost of the infrastructure and the cabling works that will be needed.
There are two types of temporary connections.
The first is a Small Temporary Connection that allows up to 70kVA of energy. You can get a small connection when you need to operate just the basic tools on the site. It can be a temporary power solution for a quick property makeover project when you need power for on-site cabins or for demolition.
The Large Temporary Connection is perfect when you require more than 70 kVA energy. For example, operating machinery or using more lights on the project site.
Step Three:
After having the discussion, the DNO will provide you with an MPAN number. Now, you will have to provide the required capacity in kilo-volt-amps. You will get the number from the DNO itself.
Once you have completed your discussion with the DNO, you will get a schedule depicting the time you will receive the power connection on your commercial premises.
Step Four:
In this step, you will have to decide which energy supplier you want to be associated with. Then finally, you will have to get in touch with a Meter Operator Provider or MOP to forget the hassles of keeping an eye on the electricity meter.
Step Five:
The authorized electricians working with your preferred MOP will come to install the meter. This is the process:
A box mounted on a pole is used to hold the equipment
The box is fixed approximately at a height between 1.5 to 2 metres above the ground
The arrangement for temporary power supply is put on a termination pole from where the overhead supply is provided
The Final Step
Now as the electricians have completed their work, they will finally connect the meter to the main power grid.
Conclusion
The temporary power supply is the perfect option for a new construction project. However, to make the most of this feature, you need to connect to a team of qualified electricians. You can be methodical when carrying out the entire process, but choosing skilled electricians will require practicality.
Comentarios